We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Brinell hardness tester.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Brinell hardness tester - List of Manufacturers, Suppliers, Companies and Products

Brinell hardness tester Product List

1～8 item / All 8 items

Displayed results
Portable Brinell hardness tester / Model number MA70-IB

Portable Brinell hardness tester / Model number MA70-IB

This device provides values that are close to those obtained from a standard Brinell hardness tester.

● Not only for test specimens, but also for any products or materials other than hollow thin-walled pipes, testing can be easily conducted regardless of size. ● The testing method is as follows: (1) Place the 5mm diameter steel ball at the tip of this device perpendicular to the surface of the test material, (2) Press the rounded part of this device with your hand, (3) Due to the internal mechanism, a constant force is applied to the steel ball, creating an indentation in the test material. (4) Measure the diameter of the indentation with the attached microscope and determine the Brinell hardness from the hardness table. ● In the case of steel, there is a nearly constant relationship between Brinell hardness and tensile strength, so tensile strength can also be estimated approximately using a separate table. * Manufactured according to the manufacturer's internal standards. * Not compliant with JIS. * The standard "hardness table" is for steel. * There is also an "aluminum hardness table," but it serves as a reference based on the manufacturer's experimental values.

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Digital Brinell Hardness Tester / Model Number M2700T-ME6201T

Digital Brinell Hardness Tester / Model Number M2700T-ME6201T

The digital Brinell hardness tester is a microcontroller-controlled Brinell hardness tester that combines a precision mechanical structure with a closed-loop control system.

This device adopts a weightless automated testing force application, using a 0.5% accuracy compression sensor for feedback, and the CPU control system automatically compensates for any lost testing force during the test. The testing force and load holding time can be directly selected on the touch panel, providing high measurement accuracy, good reproducibility, and convenient operation.

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Digital Brinell Hardness Tester / Model Number M2700T-ME6204T

Digital Brinell Hardness Tester / Model Number M2700T-ME6204T

It employs precise structural design, controls the test load, makes the overall structure compact, and allows the test load to be stable and measured accurately.

The testing process is controlled by the CPU, which manages the automatic switching function between the objective lens and the indenter. The switching position employs mechanical and electronic double matching, resulting in high positional accuracy. This device has a testing force of 10 levels and 13 types of Brinell testing scales for any selection. It is equipped with three sets of ball indenters and two sets of objective lenses, automatically recognizing and switching between the objective lenses and indenters. The dwell time of the testing force and the brightness of the light source measuring the indentation can be adjusted. It can display the measured indentation length, hardness value, number of measurements, and more. Conversion values between each hardness scale can be selected. Test results can be checked or printed out with the built-in printer, or saved by connecting to a computer via the RS232 interface.

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Digital Brinell Hardness Tester / Model Number M2700T-ME6202T

Digital Brinell Hardness Tester / Model Number M2700T-ME6202T

The digital Brinell hardness tester is a microcontroller-controlled Brinell hardness tester that combines a precision mechanical structure with a closed-loop control system.

The digital Brinell hardness tester is a microcontroller-controlled Brinell hardness tester that combines a precision mechanical structure with a closed-loop control system. This device employs a weightless automated test force application and uses a 0.5‰ precision compression sensor for feedback, while the CPU control system automatically compensates for any lost test force during testing. The device is connected to a digital micro eyepiece, eliminating the need to look up at the specimen platform, and there is no need to input the diagonal length of the indentation. It can directly display the hardness value, test force, dwell time, and indentation length. After measuring the indentation length, pressing the eyepiece button will automatically retrieve and display the hardness value on the screen.

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Digital Brinell Hardness Tester / Model Number M2700T-ME6205T

Digital Brinell Hardness Tester / Model Number M2700T-ME6205T

It adopts a precise structural design, controls the test load, makes the overall structure compact, and allows the test load to be stable and measured accurately.

The testing process is controlled by the CPU, which manages the automatic switching function between the objective lens and the indenter. The switching position employs mechanical and electronic double matching, resulting in high positional accuracy. This device has 10 levels of test force and 13 types of Brinell test scales for any selection. It is equipped with three sets of ball indenters and two sets of objective lenses, automatically recognizing and switching between the objective lens and the indenter. The dwell time of the test force and the brightness of the light source for measuring the indentation can be adjusted. It can display the measured indentation length, hardness value, number of measurements, and more. Conversion values between each hardness scale can be selected. Test results can be checked or printed out using the built-in printer, or saved by connecting to a computer via the RS232 interface.

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fully Automatic Digital Brinell Hardness Tester / Model Number M2700T-ME6206T

Fully Automatic Digital Brinell Hardness Tester / Model Number M2700T-ME6206T

Adopting a cast shell with strong rigidity and precise structural design, the overall structure becomes compact, allowing for stable and accurate measurement of test loads.

The testing process is controlled by the CPU, which manages the automatic switching function between the objective lens and the indenter. The switching position employs mechanical and electronic double matching, resulting in high positional accuracy. The built-in touchscreen tablet allows for more intuitive parameter settings and result displays, making operation convenient. It avoids stimulation from the microscope light source and visual fatigue, reducing measurement errors. This device has ten levels of testing force and thirteen types of Brinell testing scales for any selection. It features three sets of ball indenters and two sets of objective lenses, automatically recognizing and switching between the objective lenses and indenters. With high magnification, the observed surface becomes very clear. Depending on the selected hardness scale, the equipment automatically selects the corresponding indenter and objective lens. The automatic lifting table adopts a precise structure with high stability, automatically rising when measurements begin, returning to the focus position after the testing force is applied, achieving one-key automation. It adopts an integrated design of the hardness tester and panel computer. Equipped with a Windows 7 system, it has all functions operable on the computer.

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Digital Brinell Hardness Tester / Model Number M2700T-ME6203T

Digital Brinell Hardness Tester / Model Number M2700T-ME6203T

The M2700T-ME6203T is a microcontroller-controlled Brinell hardness tester that combines a precision mechanical structure with a closed-loop control system.

The digital Brinell hardness tester is a microcontroller-controlled Brinell hardness tester that combines a precision mechanical structure with a closed-loop control system. This device employs a weightless automated test force application and uses a 0.5‰ precision compression sensor for feedback, while the CPU control system automatically compensates for any lost test force during the testing process. The indentation of the impression can be measured directly with a digital microscope eyepiece, and the test force, indentation length, dwell time, number of measurements, conversion scale, date, and time can be intuitively displayed on a large screen. After measuring the indentation length, pressing the eyepiece button allows for the automatic acquisition and display of the hardness value on the screen. Test results can be checked or printed out using the built-in printer, or saved by connecting to a computer via the RS232 interface.

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Portable Brinell hardness tester "Telebrineller"

Portable Brinell hardness tester "Telebrineller"

A portable Brinell hardness tester with extremely low individual differences in operation and high measurement accuracy.

The "Telebrineller" is a portable Brinell hardness tester with minimal individual differences in operation and high measurement accuracy. It can be broadly categorized into impact mechanism, test bar, impact position switching mechanism, and anti-slip mechanism. The test bar and the specimen are positioned opposite each other with a steel ball in between, allowing the force of the hammer to be transmitted. By comparing the diameter of the indentation, the Brinell hardness number of the specimen can be easily measured. It is advantageous to select a test bar made of a material with chemical composition and hardness equivalent to or similar to that of the specimen being measured. After the indentation is made, measurements are taken using the built-in microscope. 【Features】 - Easily measure the Brinell hardness number of the specimen by comparing the diameter of the indentation. - The test bar should ideally be made of a material with similar or equivalent composition and hardness to the specimen. - The microscope has a scale with 1/10mm increments, allowing for clear measurements using a reflecting mirror. - Recommended for hardness measurement of materials and welds in railway rails, metal processing industries, valve pipes, nuclear submarines, general shipbuilding, etc. - Has decades of proven performance for regular inspections in oil plants, pipelines, ships, and land machinery. *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Related Categories of Brinell hardness tester

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.